Authorised representatives in India, Sri Lanka & Bangladesh

SEEIF Ceramic logo

SEEIF Ceramic

Refractories and ceramic gating systems for foundries and steelworks

Czech Republic Foundry & Steel
About SEEIF Ceramic

SEEIF Ceramic, a.s.

SEEIF Ceramic, a.s. develops and produces ceramic gating systems (ceramic holloware): refractory shapes with high resistance to penetration by molten metal, intended for single use in casting system assemblies.

It also produces ceramic closing systems for foundry and steel ladles, standard refractory shapes, insulating materials and many other refractory products for steel and iron foundries — and offers full technical advice on their application.

Foundry Industry

Foundry Industry products

Ceramic Whirl Gate for Foundries

Ceramic whirl gates — so-called slag traps — are widely used in steel and ductile cast iron foundries. Installed in the casting route, they work on the principle of the different densities of melt, slag and other impurities: the molten metal is thrown into the vessel, impurities float towards the surface during the rotational motion, and calm, clean metal is led through the distribution channels into the mould.

  • Absorbs the primary melt shock and converts turbulent flow into laminar flow
  • Filters small and large impurities and most of the drawn-in air
  • Eliminates defects caused by human error where technological discipline is low
  • Large enough to catch even high volumes of impurities
  • Catches filler particles in ladles with sliding closures
  • Creates no secondary inclusions, and the metal does not freeze
  • Guarantees a stable flow — unlike filters, a whirl gate cannot clog — without slowing the flow rate

Available in several sizes to match the diameter of the ceramic casting system.

Insulation Izocast

Two-layer insulating shapes of sandwich design, used where it is necessary to increase the metal feeding distance of certain casting areas or to extend solidification time without compromising surface quality — typically on areas that will not be machined further or need only a small machining allowance.

  • Extended solidification time — increased metal feeding distance exactly where it is needed
  • No additional machining — a special working layer means treated areas need no machining or cleaning after removal
  • Easy to work — blocks can be cut and shaped on the spot to the required dimensions

Izospar – Insulation of Risers

Izospar products are refractory heat-insulating standard squares and shapes with low bulk density, used to insulate risers in foundries. They enable more economical use of molten metal, reduce labour in mould making, reduce the area of burned risers and lower riser costs.

Bulk density600 – 800 kg/m³
Cold crushing strengthmin. 1 MPa
Refractorinessmin. 1 730 °C
Insulation coefficientfiz 1.45

Casting Fireclay (Ceramic Gating System)

Single-use fireclay products for foundries and steelworks, assembled into the ceramic gating system for iron casting. Suitable for castings from 5 kg up to hundreds of tonnes, with increased resistance to penetration by molten metal.

The range covers funnels, tubes, adapters (reductions), elbows, T and L pieces, splash cores and other special shapes with inner diameters from 30 mm to 150 mm, in several grades according to Al2O3 content.

PropertyF36ML65
Al2O336 %65 %
Fe2O32.5 %2.5 %
Refractoriness1 700 °C1 780 °C
Steel Industry

Refractory products for ingot casting

Engineered refractories for bottom-pouring large-tonnage and special alloy ingots in steelworks.

Funnels

Funnels

Funnels of various diameters, shapes and sizes, with optional banding.

Special pipes

Special pipes

Various types of pipes for the centre brick connection.

Kingbricks (centre bricks)

Kingbricks (centre bricks)

Manually or mechanically formed kingbricks dividing the casting stream, with one or more outlets in various diameters and sizes.

Through channels & end channels

Through channels & end channels

Mechanically pressed channels in various diameters and lengths, with one or more outlet openings, shaped to suit the casting plate.

Kokilnik

Kokilnik

A special single-piece product for outflow steel casting.

Ingot risers

Ingot risers

Several types and sizes of ingot risers to connect the inlet to the ingot mould.

Talk to an engineer, not a call centre

Interested in SEEIF Ceramic solutions?

Our team will help you specify the right SEEIF Ceramic equipment for your production and support you through installation and beyond.