Art. CR-CRP
Automatic Coating Remover
The CR-CRP automatic vertical coating remover strips coatings from the glass edge so sealants bond strongly.
Italy
The MB7501 butyl extruder was designed to ensure full compliance with the most stringent standards required for the primary seal.
The MB7501 butyl extruder was designed to ensure full compliance with the most stringent standards required for the primary seal. The injection capacity (grams of butyl rubber per linear metre) can be set directly using the touch screen control unit. The Butyl rubber is evenly dispensed by two independently controlled extruder nozzles, through two separate dispensers, which ensures an even distribution of the material around the whole perimeter. This independent control and dispensing system is a special feature unique to Forel. The touch screen control unit adjusts both the automatic opening (width adjustment) of the nozzles and the positioning of the pre-extrusion guides, all at the same time in a single operation, according to the selected spacer width value. The machine is able to apply butyl rubber on shaped (curved) profiles or Georgian bar frames, with exceptional accuracy and simplicity of operation. The machine also features a system to allow for vertical adjustment of the nozzles position, so that extrusion height can be varied for processing special profiles. The number and correct distribution of resistance heating elements inside the circuits allows for a fast restart after changing the butyl rubber. Preproduction heating can be pre-set to automatically turn on.
Art. CR-CRP
The CR-CRP automatic vertical coating remover strips coatings from the glass edge so sealants bond strongly.
FOREL’s VW vertical washing machine meets the requirements of an increasingly diverse insulating glass market.
Art. SQD00
The function of the SQD00 Scanner is to check the glass by detecting the shape and dimensions of the sheet in transit on the line.
Art. SQD01
The SQD01 Scanner performs real-time quality control on the glass by detecting defects, indentations or microfractures, and displaying them on the monitor.
Tell us about your requirement — our engineers will recommend the right machine and principal, and support you from quotation to commissioning.